Base Vent Drip Edge

The base vent drip edge provides intake ventilation at the base of the wall and roof cavity, preventing condensation moisture in the wall.  By removing the potential for condensation moisture, it virtually eliminates the possibility of mold. Also this metal piece is a drip edge preventing rain from running down the face of the riser wall.  By reducing the water intrusion, mold is not likely to grow. 

 


Wednesday 3:30pm - Drilling the ventilation holes in the bottom of the 1st row of triangles. This will allow air to come into the 2" space between the exterior panel and the insulation.

 


Wed. - Installing the metal vent drip edge covering the ventilation holes.

 


Wed. 3:30pm - At the dome corners the base vent drip edge is simply overlapped.

Back | Back to Home